ProTech 7035-SL Lithium Powered Carbon Monoxide Detector with Digital Display

The ProTech 7035-SL lithium battery powered residential carbon monoxide detector is reliable, secure and low maintenance. A state-of-the-art electrochemical sensor provides reliable protection, while the Secure-Lock mounting plate deters tampering. Digital readout automatically displays carbon monoxide levels detected between 40 to 600 ppm. Current and peak carbon monoxide levels detected from 10-600ppm can be manually displayed by tapping the test/reset button. The factory pre-installed long-life lithium battery is guaranteed to last the life of the carbon monoxide detector, and is locked within a compartment secured with a tamper resistant screw. Simply pull out tab to start detection. A unique Sensor Life Monitor alerts you when the carbon monoxide detector sensor life has expired. UL Listed, IAS certified, 5-year factory warranty.

	9V DC Battery Powered Carbon Monoxide Detectors
	Lithium Battery Pre-Installed - 5 Year Battery Life

Five Year Battery

	Digital Display and Memory
	Electrochemical Sensor
	Sensor Life Monitor
	Samples every 2 minutes
	Instant Test/Reset Feature
	Self-Diagnostic Circuitry
	Operating Temperature 40°F to 100°F
	Case Color White
	Case Size 6˝" x 3ž" x 1ž"

	Chronic Alarm Time: 40-70ppm @ 60-240 minutes
	Acute Alarm Time: 400ppm @ 4-15 minutes
	Audible 85dB Pulsating Alarm Signal: 4 Beeps Every 5 Seconds
	Visual Alarm Signal: Flashing Red LED
	Low Battery Signal: Displays "Bat", 1 Beep per Minute; Flashing Green LED
	Malfunction Signal: Displays "Err", 2 Beeps per Minute; Flashing Red LED
	End-of-Life Signal: Displays "End", 1 Beep per Minute; Flashing Red LED

	Tamper Resistant Installation
	Integral Restraining Flange
	Secure-Lock Mounting Plate

Secures directly to wall through universal mounting plate

Battery Compartment Locked with Tamper-Resistant Screw

Pull out tab to activate battery

Model 7035-SL
Carbon Monoxide Detector

ProTech 7035-SL Lithium Powered CO Alarm w/Digital Display, Memory and Secure-Lock

	Alpha-Numeric LCD Display
	Continuously Displays "On"
	Automatically Displays Current CO Levels Detected from 40-600 ppm
	Manually Displays Current CO Detected from 10-600 ppm*
	Peak Level Detected from 10-600 ppm is Stored in Memory and Manually Displayed*
	Time Duration of Peak Level is Stored in Memory and Manually Displayed*

*Can be displayed or recalled from memory when Test/Reset button is tapped.

	ANSI/UL 2034-09 Listed
	CSA 6.19-01/IAS 6-96 2nd Ed. Certified
	NFPA 720-05 Compliant
	Blue Star Certified
	5 Year Limited Factory Warranty


	NOTE: Underwriters Laboratories has tested the ProTech carbon monoxide alarms at 30, 70, 150 and 400ppm. To assure that an alarm will be activated at or below 70ppm within 1-4 hours, but not false alarm below 30ppm, this detector may alarm as low as 40 ppm.