Home   |   Contact Us



  >Home >Catalog>Pro-Tech 7035        
  Pro-Tech 7035  
  Lithium Battery Powered Carbon Monoxide Alarm with LCD Display  



  The PRO-TECH 7035 Lithium Battery Powered Carbon Monoxide Alarm combines all of the best features in the market into one product.

Carbon monoxide (CO) levels detected from 10-600 ppm are measured and recorded by a state-of-the-art water-based electrochemical sensor. The current and peak CO levels detected of 10 ppm or more, and the duration of the peak level, are manually displayed by tapping the test/reset button. Current CO levels detected of 40 ppm or more are automatically displayed.

When a chronic carbon monoxide level of 70 ppm or more is detected, a flashing Red LED and 85db pulsating alarm are activated, and the CO level detected is displayed up to 600 ppm.

Pressing the reset button temporarily mutes the audible signal while the carbon monoxide level is rechecked. If carbon monoxide remains at alarm levels, the visual and audible signals are automatically reactivated. After ventilation, the LED is auto-reset to a flashing Green (power on), the audible signal is silenced, and detection restarts.

An internal clock monitors the sensor life and activates visual and audible sensor expiration signals after five years. The Lithium battery included should last the life of the carbon monoxide detector.

The Pro-Tech 7035 Carbon Monoxide Alarm is engineered and manufactured under an ISO 9001 Quality Management System for improved product quality, reliability, and customer confidence. Backed by a five year limited factory warranty. Not available to California.


Alarm Basics

Lithium Battery Powered Carbon Monoxide Alarm
9vDC Lithium Battery - 5 Year Battery Life
Digital Display and Memory
Electrochemical Sensor
Sensor Life Monitor
Samples every 2 minutes
Instant Test/Reset Feature
Self-Diagnostic Circuitry
Operating Temperature 40F to 100F
Case Color White
Case Size 6" x 3" x 1"

Certifications/Standards and Warranty

ANSI/UL 2034-09 Listed
NFPA 720 Compliant
Five-Year Limited Factory Warranty



Alarm Signals

Chronic Alarm Time: 70ppm @ 60-240 minutes
Acute Alarm Time: 400ppm @ 4-15 minutes
Audible 85dB Pulsating Alarm Signal: 4 Beeps Every 5 Sec.
Visual Alarm Signals: Displays Current CO Level Detected, Flashing Red LED
Low Battery Signals: Displays "Bat", 1 Beep per Minute; Flashing Green LED
Malfunction Signals: Displays "Err", 2 Beeps per Minute; Flashing Red LED
End-of-Life Signals at Five Years: Displays "End", 1 Beep per Minute, Flashing Red LED

Display & Memory

LCD Display
Continuously Displays "On"
Automatically Displays Current CO Level Detected from 40-600 ppm
Manually Displays Current CO Level Detected from 10-600 ppm*
Peak Level Detected from 10-600 ppm is Stored in Memory and Manually Displayed*
Time Duration of Peak Level is Stored in Memory and Manually Displayed*

*Can be displayed or recalled from memory when Test/Reset button is tapped.

   Copyright 2017 Protech Safety. All Rights Reserved

Site Map  |  About Us  |  Contact Us  |  Catalog